home *** CD-ROM | disk | FTP | other *** search
- Path: sn.no!usenet
- From: jorni@sn.no (J°rn Innset)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Cyber-trouble
- Date: 23 Jan 1996 06:57:58 GMT
- Organization: SN Internett
- Message-ID: <1346.6595T1060T1713@sn.no>
- References: <2189.6584T740T1730@sn.no> <w+vLzMD4FC8aezC@_crisi.blackbox.shnet.org>
- NNTP-Posting-Host: nm1-ppp4.oslo.net
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP)
-
- JI>> I recently replaced my A3640 CPU-card and A4091 SCSI-2 card with a
- JI>> Cyberstorm
- JI>> 060 CPU-card with the CyberSCSI module. Ever since, I've had lots of
- JI>> trouble with checksum-errors on my drives.
- >Some stupid suggestions:
- >- Have you enabled the termination power jumper on the controller ? You
- > don't have any internal devices, so it should be set, if I
- > understand the docs correctly.
-
- Yep.
-
- >- Have you disabled the 1-2 jumper on the external SCSI connector
- > board ? The docs are not clear about it, but I think is must be
- > unset when you don't have internal devices.
-
- Yep.
-
- >- Have you enabled the 2-3 jumper on the external SCSI connector ?
- > It must be set if you have external devices.
-
- Errr...no. In fact, if you read your previous paragraph, you'll see why.
-
- >Try this along with switching the jumper for synchronous transfer.
-
- I have. No go.
-
- Thanks for trying though, you're the only one so far...:-(
- __ ________
- Amiga /// | Jorn Innset | This space | __/ == \__
- /// | 22-Jan-96 17:38:06 | intentionally left | \/__________\/
- __ /// | jorni@oslonett.no | blank. | |_\________/_|
- \\\/// | Thor 2.0 | Yeah, right... | |__========__|
- \XX/ """ MR2! """
-
-